
Long read
How Wales moved the world: the industrial revolution
The first steam locomotive ran on rails at Merthyr. The first passenger railway ran at Swansea. Welsh iron made the world’s rails, Welsh coal drove its ships, Welsh slate roofed its cities, and the first cheque for a million pounds was signed in Cardiff.
Picture: A Ffestiniog Railway steam train curving through the hills of Eryri · SchmalspurDVZO, CC BY-SA 4.0 · Wikimedia Commons
On a cold February morning in 1804 a hissing iron engine rolled out of the Penydarren ironworks at Merthyr Tydfil, pulling ten tons of iron and seventy men. No machine had ever done that on rails before. Within a hundred years the valleys of Wales were sending iron, coal, copper, tinplate and slate to every continent, in Welsh-built wagons, along Welsh-built canals and railways, out of the greatest coal ports on earth. This is the story of how a small country moved the world.
| The first locomotive | Penydarren, Merthyr Tydfil, 21 February 1804 |
|---|---|
| The first passenger railway | The Oystermouth Railway, Swansea, 25 March 1807 |
| The iron capital of the world | Merthyr Tydfil: Cyfarthfa, then Dowlais, the largest ironworks in the world |
| The busiest coal port in the world | Cardiff, then Barry in 1913, with 11 million tons |
| The first million-pound cheque | Signed at the Coal Exchange, Cardiff, in 1904 |
| Copperopolis | Swansea, the world’s leading copper smelting town |
| Roofing the world | Penrhyn and Dinorwig, the two largest slate quarries in the world |
| The little railway the world copied | The Ffestiniog Railway: steam on narrow gauge, 1863 |
| World Heritage | Blaenavon (2000), Pontcysyllte (2009), the Slate Landscape (2021) |
Why Wales?#
Wales had what the new age needed, all in one place. The valleys of the south held coal, iron ore and limestone side by side, the three things a blast furnace eats. The rivers ran fast enough to turn waterwheels. And nowhere in Wales is far from the sea, so whatever the valleys made could be carried down to a harbour and shipped anywhere in the world. In the words of UNESCO, south Wales was ‘the world’s major producer of iron and coal in the 19th century’.SourceBlaenavon Industrial Landscape ↗UNESCO World Heritage List, inscribed 2000It shows “the pre-eminence of South Wales as the world’s major producer of iron and coal in the 19th century”.
The first railway journey in the world, 1804#
Samuel Homfray, master of the Penydarren ironworks, had hired a brilliant Cornish engineer, Richard Trevithick, to build engines for his works. Homfray believed one of them could pull loads along the tramroad that ran from Merthyr down the valley to the canal at Abercynon, where the horses then did the work. Richard Crawshay of Cyfarthfa said it could not be done. They bet five hundred guineas on it.SourceRichard Trevithick: Merthyr Tramroad Trial ↗Grace’s Guide to British Industrial HistoryHomfray bet Crawshay 500 guineas; on 21 February 1804 the engine took 10 tons of iron in five wagons and 70 men the 9¾ miles from Penydarren to Abercynon in 4 hours 5 minutes.
On 21 February 1804 Trevithick’s engine, built by the ironworkers of Penydarren, set off down the tramroad with five wagons carrying ten tons of iron and some seventy men who had climbed aboard for the ride. It covered the nine and three-quarter miles to Abercynon in four hours and five minutes, stopping on the way to cut down trees and move rocks out of the path. Homfray won his bet. It was the first time in the world that a steam locomotive had run on rails and hauled a load.SourcesFirst steam locomotive to run on rails ↗Guinness World RecordsThe first steam locomotive to run on rails was Richard Trevithick’s, built at the Penydarren ironworks, Merthyr Tydfil; it first ran on 21 February 1804.Richard Trevithick: Merthyr Tramroad Trial ↗Grace’s Guide to British Industrial HistoryHomfray bet Crawshay 500 guineas; on 21 February 1804 the engine took 10 tons of iron in five wagons and 70 men the 9¾ miles from Penydarren to Abercynon in 4 hours 5 minutes.Richard Trevithick ↗Transport for Wales, Railway 200Trevithick’s locomotive, built for Samuel Homfray, hauled 10 tonnes of iron the nine miles from Penydarren to Abercynon on 21 February 1804.
Yesterday we proceeded on our journey with the engine. We performed the nine miles in four hours and five minutes.
Richard Trevithick, letter to Davies Gilbert, 22 February 1804
The engine was so heavy that it cracked the iron plates of the tramroad, and it went back to work as a stationary engine. But the idea had been proved at Merthyr. Twenty-one years later the Stockton and Darlington Railway opened in England, and the age of the railway began.

The first passenger railway in the world, 1807#
Three years later Swansea gave the world another first. The Oystermouth Railway, a horse-drawn line along the shore of Swansea Bay, had been built to carry coal, iron ore and limestone. In February 1807 one of its proprietors, Benjamin French, agreed to pay twenty pounds a year for the right to carry passengers on it, and on 25 March 1807 his carriage began to run. It was the first regular passenger railway service anywhere in the world.SourcesFirst regular passenger railway service ↗Guinness World RecordsThe first regular passenger railway service began on the Oystermouth Railway, Swansea, on 25 March 1807, run by Benjamin French for £20 a year.Swansea, Oystermouth and Mumbles Railway ↗Transport for Wales, Railway 200“In March 1807, the very first fare paying rail passenger journey took place”, with carriages pulled by horses. As the Mumbles Railway it carried people for more than 150 years, by horse, by steam and at last by electricity, until 1960.
Merthyr, iron capital of the world#
In 1750 Merthyr Tydfil was a village. By 1851 it had more than 46,000 people and was by far the largest town in Wales, and the reason was iron. Four great works stood round the town: Cyfarthfa, Dowlais, Penydarren and Plymouth. Cyfarthfa, under Richard Crawshay and his family, was for a time the greatest of them. Admiral Nelson came to see it in 1802, its furnaces cast cannon for the navy, and when it began to roll iron rails the Tsar of Russia sent a man to look.SourceCyfarthfa Ironworks ↗Wikipedia, with its sourcesCyfarthfa made cannon for the Board of Ordnance; Nelson visited in 1802, and its iron rails drew a representative from the Tsar of Russia.

Then Dowlais overtook it. Under the Guest family, Dowlais became the largest ironworks in the world.SourceMerthyr Tydfil historic landscape: Dowlais ↗Historic landscape characterisation for Cadw (Glamorgan-Gwent Archaeological Trust, now Heneb)Dowlais became “the largest ironworks in the world” in the 19th century; the rails for the Stockton and Darlington Railway were made there in 1821. In 1845 it had eighteen blast furnaces and 7,300 workers, and made some 88,000 tons of iron a year.SourceDowlais Ironworks ↗Grace’s Guide to British Industrial HistoryIn 1845 the works had 18 furnaces and 7,300 workers and made about 89,000 tons of iron a year; Lady Charlotte Guest helped run it. Lady Charlotte Guest, who translated the Mabinogion, helped her husband run it and ran it herself after his death.

Above all, Merthyr made rails. Dowlais rolled iron for the Stockton and Darlington Railway in 1821.SourceMerthyr Tydfil historic landscape: Dowlais ↗Historic landscape characterisation for Cadw (Glamorgan-Gwent Archaeological Trust, now Heneb)Dowlais became “the largest ironworks in the world” in the 19th century; the rails for the Stockton and Darlington Railway were made there in 1821. By the 1830s its orders came from abroad: rails for the railway from Berlin to Leipzig and for the line out of St Petersburg in Russia.SourceDowlais Ironworks ↗Wikipedia, with its sourcesForeign orders in 1835–36 included rails for the Berlin and Leipzig Railway and the St Petersburg line; Dowlais was the first to license the Bessemer process and made steel from 1865. As railways spread across Europe, the Americas and the empire, Welsh rails went with them. Dowlais was the first works to take a licence for Bessemer’s new steel, and from 1865 it rolled steel rails as well.SourceDowlais Ironworks ↗Wikipedia, with its sourcesForeign orders in 1835–36 included rails for the Berlin and Leipzig Railway and the St Petersburg line; Dowlais was the first to license the Bessemer process and made steel from 1865.

Welsh ironmasters and ironworkers carried what they knew across the world. David Thomas of the Neath valley, who had learned to smelt iron with anthracite at Ynyscedwyn, took the method to Pennsylvania in 1839 and is honoured there as the father of the American anthracite iron industry. John Hughes, son of a Cyfarthfa engineer, sailed to the Russian Empire in 1869 with eight shiploads of machinery and a hundred skilled men from south Wales, and the town that grew round his works, Hughesovka, is the city of Donetsk today. And at Blaenavon in 1878 two cousins, Sidney Gilchrist Thomas, whose father was Welsh, and Percy Gilchrist, the chemist at the ironworks, found how to make good steel from iron ore full of phosphorus. Their method was worth most on the continent of Europe, where such ore was common, and it helped build the steel industries of Germany and Belgium.SourceSidney Gilchrist Thomas ↗Wikipedia, with its sourcesHis cousin Percy Gilchrist, chemist at Blaenavon, proved the method; it was announced in 1878 and was “especially valuable on the continent of Europe”.
The canals#
Iron is heavy, and in the 1700s the roads out of the valleys were tracks for packhorses. The answer was water. In 1794 the Glamorganshire Canal opened from Merthyr to Cardiff, about twenty-five miles with some fifty locks, falling more than five hundred feet to the sea. In 1798 a sea lock carried it right out to the ships, and the day it opened was celebrated with a naval procession and the firing of guns.SourceGlamorganshire Canal ↗Wikipedia, with its sourcesOpened to Cardiff on 10 February 1794, about 25 miles with some 50 locks; the sea lock opened in June 1798 with a naval procession and ships’ guns. The Neath, Swansea and Monmouthshire canals were cut in the same decade, and a web of horse-drawn tramroads, such as the one Trevithick’s engine ran on, fed them from the works and pits.

In the north, the Ellesmere Canal crossed the valley of the Dee at Pontcysyllte on an iron trough carried high on stone piers. Thomas Telford’s aqueduct, opened in 1805, is still the highest in Britain, and since 2009 it has been a World Heritage Site: in UNESCO’s words, ‘a pioneering masterpiece of engineering’.SourcePontcysyllte Aqueduct and Canal ↗UNESCO World Heritage List, inscribed 2009Telford’s aqueduct is “a pioneering masterpiece of engineering”.

Cardiff: the coal metropolis#
The Welsh steam coal trade began with a widow. When Robert Thomas died in 1833, Lucy Thomas took over their small coal level at Waun Wyllt near Merthyr and sold its coal to George Insole, a Cardiff merchant, who sent it to London. It burned hotter and cleaner than any other coal. In 1840 the first cargo of Welsh coal went abroad, from Cardiff to Nantes in France.SourceSouth Wales Coalfield timeline ↗AGOR, the South Wales Coalfield collection1840: the first cargo of coal shipped abroad, Cardiff to Nantes. 1851: an Admiralty report finds south Wales steam coal most suitable for the Royal Navy. 1855: the first train of Rhondda steam coal reaches Cardiff.
Cardiff was made for the trade. The second Marquess of Bute opened the West Bute Dock in 1839, and the Taff Vale Railway, engineered by Isambard Kingdom Brunel, reached it from Merthyr in 1841. When the steam coal of the Rhondda began to flow in 1855, dock after dock followed: the East Bute Dock in 1859, Penarth in 1865, the Roath Dock in 1887, the Queen Alexandra Dock in 1907. Cardiff sent out about two million tons of coal in 1862. In 1913 it sent out 10.7 million tons. Before the First World War, says the National Museum, more cargo passed through Cardiff than through London or Liverpool.SourceCardiff: Coal and Shipping Metropolis of the World ↗Amgueddfa Cymru, National Museum WalesCardiff exported about 2 million tons of coal in 1862 and 10.7 million in 1913; before 1914 its cargo tonnage “outstripped that of either London or Liverpool”; about 250 tramp steamers were owned there in 1910. Around 250 tramp steamers were owned in the town, and Cardiff ships carried Welsh coal to every ocean.

The first million-pound cheque, 1904#
At the heart of it all stood the Coal Exchange in Mount Stuart Square, built in 1884 to 1886. Every day at noon its great trading hall filled with coal owners, shipowners and brokers, as many as two hundred men shouting and waving on the floor at the busiest hour, and some ten thousand people in and out of the building in a day. Deals struck on that floor settled what coal would cost in ports right round the world: it was where the price of the world’s coal was set.SourcesCoal Exchange ↗Wikipedia, with its sources“At one time the price of the world’s coal was determined here”; up to 200 men on the floor at the midday peak and some 10,000 people a day; the first £1,000,000 deal was agreed here in 1904.Cardiff Coal Exchange ↗The Victorian Society, Top Ten Endangered BuildingsBuilt in 1884–86 by Seward and Thomas, Grade II* listed; the world’s coal prices were set there, and the first £1 million cheque was signed there in 1904.
And it was here, in 1904, that the first cheque for one million pounds was signed.SourcesCardiff Coal Exchange ↗The Victorian Society, Top Ten Endangered BuildingsBuilt in 1884–86 by Seward and Thomas, Grade II* listed; the world’s coal prices were set there, and the first £1 million cheque was signed there in 1904.The Coal Exchange, Cardiff ↗People’s Collection WalesRecords the world’s first recorded £1m cheque, written at the Coal Exchange in 1904 to sign a deal.Commerce ↗Cardiff Bay HeritageThe Coal Exchange, “the hub for trade in coal”, opened in 1888; the first £1m cheque “was written here in 1904”.Coal Exchange ↗Wikipedia, with its sources“At one time the price of the world’s coal was determined here”; up to 200 men on the floor at the midday peak and some 10,000 people a day; the first £1,000,000 deal was agreed here in 1904. No cheque that size had ever been written in the world. It became the proudest story of the Coal Exchange, and Cardiff still tells it. The year usually given is 1904; one or two tellings put it in 1901 or 1908, and the name of the merchant who signed it has not come down to us.SourceCardiff Coal Exchange: economic centre to entertainment venue ↗Phil Carradice, BBC Wales History blog, 2012Opened on 1 February 1886; this telling dates the first £1 million deal to 1901. But on the trading floor in Mount Stuart Square, a coal deal from the valleys of Wales was the first in history to be paid with a million pounds.
| The cheque | The first cheque for one million pounds (£1,000,000) in the world |
|---|---|
| Where | The trading floor of the Coal Exchange, Mount Stuart Square, Cardiff |
| When | 1904 |
| For | A deal in Welsh coal |

Barry: the busiest coal port on earth#
By the 1880s Cardiff’s docks were so crowded that ships waited days for a berth. David Davies of Llandinam, a farmer’s son from Montgomeryshire who had built railways across mid Wales and sunk the Ocean collieries in the Rhondda, decided to build a port of his own. With John Cory and the other coal owners he dug Barry Docks out of the shore beside Barry Island and built the Barry Railway to bring the coal down from the valleys. The first water came into the dock on 29 June 1889, and it opened on 18 July.SourceBarry Docks ↗Wikipedia, citing W. Minchinton (2013) and othersWater first admitted 29 June 1889, opened 18 July 1889, promoted by David Davies and John Cory; in 1913 Barry exported 11.05 million tons and was the busiest coal port in the world, ahead of Cardiff’s 10.6 million.
Barry grew faster than anyone had dreamed. In 1913, the greatest year of the coal trade, it shipped 11.05 million tons and passed Cardiff to become the busiest coal port in the world.SourceBarry Docks ↗Wikipedia, citing W. Minchinton (2013) and othersWater first admitted 29 June 1889, opened 18 July 1889, promoted by David Davies and John Cory; in 1913 Barry exported 11.05 million tons and was the busiest coal port in the world, ahead of Cardiff’s 10.6 million. Between them, Barry, Cardiff, Penarth, Newport, Swansea and Port Talbot sent Welsh coal to every corner of the globe.

Steam coal: fuel of the world’s ships#
Why did the world want Welsh coal? Because the steam coal of the south Wales valleys burned fiercely, with little smoke and little ash. A warship burning it could not be seen from far off, and a steamship carrying it needed less space for fuel and more for cargo. In 1851 a report for the Admiralty found south Wales steam coal the most suitable fuel for the Royal Navy, and from the 1840s the Admiralty kept a list of the collieries it would buy from, with a naval officer at Cardiff to watch the loading.SourcesSouth Wales Coalfield timeline ↗AGOR, the South Wales Coalfield collection1840: the first cargo of coal shipped abroad, Cardiff to Nantes. 1851: an Admiralty report finds south Wales steam coal most suitable for the Royal Navy. 1855: the first train of Rhondda steam coal reaches Cardiff.Fuelling mobility: coal and Britain’s naval power, c. 1870–1914 ↗Research paper, University of PortsmouthWelsh steam coal was “universally agreed to be of the highest quality for steam engines”; the Admiralty kept a list of approved collieries from the 1840s, with a naval captain at Cardiff; in 1889 the First Lord called Welsh coal the only home fuel fit for the navy; Welsh merchants traded with foreign navies in peacetime. In 1889 the First Lord of the Admiralty declared that Welsh coal was the only British coal fit for the special work of the navy.SourceFuelling mobility: coal and Britain’s naval power, c. 1870–1914 ↗Research paper, University of PortsmouthWelsh steam coal was “universally agreed to be of the highest quality for steam engines”; the Admiralty kept a list of approved collieries from the 1840s, with a naval captain at Cardiff; in 1889 the First Lord called Welsh coal the only home fuel fit for the navy; Welsh merchants traded with foreign navies in peacetime.
It was not only Britain’s navy. Welsh merchants sold to the navies of other nations in peacetime, and colliers out of Cardiff and Barry stocked the coaling stations where the world’s steamships refuelled, on routes that ran round Africa, through Suez to India and the Far East, and across the Pacific. Ships that burned Welsh coal no longer waited on the wind: they came and went on time, and the trade of the world sped up with them.SourcesWales, a modern maritime nation ↗Amgueddfa Cymru, National Museum WalesSouth Wales steam coal had the place oil has today; ships that burned it no longer depended on the wind and arrived sooner and more reliably.Fuelling mobility: coal and Britain’s naval power, c. 1870–1914 ↗Research paper, University of PortsmouthWelsh steam coal was “universally agreed to be of the highest quality for steam engines”; the Admiralty kept a list of approved collieries from the 1840s, with a naval captain at Cardiff; in 1889 the First Lord called Welsh coal the only home fuel fit for the navy; Welsh merchants traded with foreign navies in peacetime.

When Captain Scott sailed for the South Pole in 1910, his ship Terra Nova made Cardiff her home port and set out from there, with a hundred tons of steam coal from the south Wales coal companies and three hundred tons of fuel blocks given by the Crown Patent Fuel Company of Cardiff.SourceFuelling Antarctic exploration: The Crown Patent Fuel Company in Cardiff ↗Amgueddfa Cymru, National Museum WalesScott made Cardiff the Terra Nova’s home port; the Crown Patent Fuel Company gave 300 tons of fuel blocks and south Wales coal companies 100 tons of steam coal. Welsh coal went to the ends of the earth.
In 1913 the coalfield of south Wales raised about 57 million tons of coal and employed some 232,000 men. The story of those men, their courage and what their work cost them, is told in our long read on coal.
Swansea: Copperopolis#
Long before coal was king, Swansea was the copper capital of the world. The first copper works rose on the banks of the Tawe in the early 1700s, because it was cheaper to bring the ore to the coal than the coal to the ore. Ships brought copper ore up the river from Cornwall and from Parys Mountain in Anglesey, which became the greatest copper mine in the world in the 1780s. The Hafod works, built by the Vivian family in 1810, was perhaps the largest and most up to date copperworks anywhere.SourcesHafod Copperworks ↗Visit Swansea BayThe Hafod works, run by the Vivians from 1810 to 1924, was perhaps the largest and most up-to-date copperworks in the world; ore came from Cornwall, then Chile and Australia, and Captain David Morgan brought ore from Chile.Copperopolis: Regenerating and Transforming an Industrial Landscape in the Lower Swansea Valley ↗Swansea University, REF impact case studyThe Lower Swansea Valley was a world centre for copper smelting by the end of the 1700s, and Swansea led the world until the 1870s; the Hafod works was built in 1810.

By the nineteenth century the lower Swansea valley smelted about nine-tenths of Britain’s copper, and until the 1870s Swansea was the leading copper smelting centre in the world.SourcesLower Swansea Valley ↗City and County of SwanseaIn the 19th century Swansea was the world’s leading centre for smelting copper ore, and smelted about 90% of the UK’s copper.Copperopolis: Regenerating and Transforming an Industrial Landscape in the Lower Swansea Valley ↗Swansea University, REF impact case studyThe Lower Swansea Valley was a world centre for copper smelting by the end of the 1700s, and Swansea led the world until the 1870s; the Hafod works was built in 1810. As the Cornish mines ran low, Swansea’s ships went further for ore: to Cuba, to Chile and to Australia. The little wooden barques of the copper trade, known as the Cape Horners, sailed round Cape Horn to Chile and back, some of the hardest voyages in the world. Swansea copper went out again to the world as sheets and bolts for ships, as wire and boilers, coins and kettles. Llanelli, just along the coast, made so much of the world’s tinplate that it was called Tinopolis.
Slate: roofing the world#
In the north, the mountains of Gwynedd were made of slate, and the world needed roofs. Penrhyn quarry at Bethesda and Dinorwig above Llanberis grew into the two largest slate quarries in the world, and the Oakeley at Blaenau Ffestiniog into the largest slate mine.SourceSlate industry in Wales ↗Wikipedia, with its sourcesOutput peaked at over half a million tons in 1898 with about 17,000 men; Penrhyn and Dinorwig were the two largest slate quarries in the world and the Oakeley the largest slate mine; Germany became a market after the Hamburg fire of 1842; Porthmadog built 201 ships between 1836 and 1880. Quarrymen cut whole mountainsides into giant steps. At the peak in 1898 the industry produced more than half a million tons of slate and employed about 17,000 men.SourceSlate industry in Wales ↗Wikipedia, with its sourcesOutput peaked at over half a million tons in 1898 with about 17,000 men; Penrhyn and Dinorwig were the two largest slate quarries in the world and the Oakeley the largest slate mine; Germany became a market after the Hamburg fire of 1842; Porthmadog built 201 ships between 1836 and 1880. By the late nineteenth century, says UNESCO, north-west Wales produced about a third of all the roofing slates in the world.SourceThe Slate Landscape of Northwest Wales ↗UNESCO World Heritage List, inscribed 2021“By the late 19th century, the region produced about a third of the world output of roofing slates.”

The slate went out by sea from Port Penrhyn, Port Dinorwic and Porthmadog. After the great fire of Hamburg in 1842 Germany rebuilt its roofs with Welsh slate, and slate went to America, across Europe and beyond. Porthmadog built more than two hundred ships of its own between 1836 and 1880 to carry it. Since 2021 the Slate Landscape of Northwest Wales has been a World Heritage Site.SourceThe Slate Landscape of Northwest Wales ↗UNESCO World Heritage List, inscribed 2021“By the late 19th century, the region produced about a third of the world output of roofing slates.”
The little railway the world copied#
To bring slate down from Blaenau Ffestiniog to the harbour at Porthmadog, the Ffestiniog Railway was built between 1833 and 1836, with rails less than two feet apart, winding along the mountainside so that loaded wagons ran all the way down by gravity, and horses pulled the empties back up. In 1863 it did what engineers said could not be done: it put steam locomotives on so narrow a gauge. The first, Princess and Mountaineer, entered service that October, and soon passengers rode too, the first narrow-gauge passenger trains in Britain.SourceHistory of the Ffestiniog Railway ↗Ffestiniog and Welsh Highland RailwaysIncorporated 1832 and worked by gravity and horses; Princess and Mountaineer entered service in October 1863; passenger trains from 1864, the first on a narrow gauge in Britain; Little Wonder was shown in 1870 before engineers including the Imperial Russian Commission.
In 1869 came Little Wonder, a double engine built to Robert Fairlie’s design. In February 1870 it was tried before an audience that included the Imperial Russian Commission, commissioners of the Government of India and the Board of Trade. Little Wonder hauled 112 wagons, 206 tons, up the line at twelve and a half miles an hour.SourcesFestiniog Railway Little Wonder ↗Wikipedia, with its sourcesIn the 1870 trials, watched by the Imperial Russian Commissioners and the Commissioners of the Indian Government, Little Wonder hauled 112 wagons (206 tons) at an average of 12.5 mph.History of the Ffestiniog Railway ↗Ffestiniog and Welsh Highland RailwaysIncorporated 1832 and worked by gravity and horses; Princess and Mountaineer entered service in October 1863; passenger trains from 1864, the first on a narrow gauge in Britain; Little Wonder was shown in 1870 before engineers including the Imperial Russian Commission. Engineers went home convinced that cheap narrow-gauge railways could open up mountains and empires, and narrow-gauge lines spread across Russia, India, Africa, South America and Australia.

Bridges to the world#
The road and rail to Ireland ran through Wales too. Telford’s Menai Suspension Bridge of 1826, then the largest suspension bridge in the world, carried the London to Holyhead road across the strait to Anglesey, and in 1850 Robert Stephenson’s Britannia Bridge carried the railway beside it, so that the mail and the trade of Britain and Ireland could pass between them by Holyhead.SourceMenai Bridge ↗Grace’s Guide to British Industrial HistoryOpened on 30 January 1826; when it was completed “it was the largest suspension bridge in the world”. Both still stand.
What Wales gave#
The first railway locomotive in the world, and the first passenger railway. The largest ironworks in the world, whose rails ran across Europe and beyond. The busiest coal ports on earth, and the fuel that drove the world’s ships. The copper capital of the world, and the slate that roofed its cities. The little railway that showed the world how to cross mountains. And a cheque for a million pounds, the first ever written, signed on the trading floor of the Coal Exchange in Cardiff.
Three of the four World Heritage Sites in Wales celebrate this age: the industrial landscape of Blaenavon, the Pontcysyllte Aqueduct and the Slate Landscape of Gwynedd. You can still ride the Ffestiniog Railway, go underground at Big Pit, see the Penydarren engine at the National Waterfront Museum in Swansea, and stand in the trading hall of the Coal Exchange where the price of the world’s coal was set. A small nation helped to move the world.
How Welsh Slate Roofed the World – and Why Bethesda Walked Out for Three Years → Iron, Power and Protest: Merthyr and the Rising of 1831 → Coal: the fuel of an empire, and its price → Wales did it first → Lucy Thomas, mother of the steam coal trade → David Davies of Llandinam, who built Barry Docks → John Hughes, who took Welsh iron to Ukraine → Merthyr Tydfil → The Hafod copperworks → The Slate Landscape of Gwynedd → Wales at work: the topic guide →
Read next on this subject
Long read · 6 minCoal: the fuel of an empire, and its price
In 1913 the valleys of south Wales powered navies and railways across the world. A century later the last deep mine had closed. This is what coal built, and what it cost.
Long read · 20 min NewHow Welsh Slate Roofed the World – and Why Bethesda Walked Out for Three Years
The flagship story of Welsh slate: the ancient rock of Eryri, the galleries and railways that carried it to the sea, the ships that took it to the roofs of the world, the bargain and the caban that made the quarrymen craftsmen and scholars, their union, and the three years when Bethesda stood out for the right to speak for itself.
Long read · 5 minWales did it first
The first steam locomotive, the first passenger railway, the equals sign, the symbol for pi and the first radio message across the sea. A small country with a long list.
The age · 1800 – 1914Industrial Wales
Iron, coal, slate and chapel; risings, riots and a nation remade in a single century.
Written by Ifan First published Last updated